Panel zdalnego sterowania Ion Control
Producent: Victron Energy
Indeks: Ion Control
Zapotrzebowanie na luksus i komfort na pokładzie łodzi rośnie z dnia na dzień. Niestety, prowadzi to do powstawania coraz gęstszych sieci przewodów i niezliczonej ilości paneli sterowniczych.
Opis
The Ion Control shows all vital data from the Lithium Battery system:
It will also show the following historic values:
The diagnostic data displayed is:
Using multiple Ion Controls
Multiple Ion Controls can be installed to monitor a single Lithium Battery System. All Ion Controls will display the same data. It is recommended, when more than one Ion Control is installed, to use an external network power source due to the limited capacity of the Lynx Shunt’s power supply.
Specyfikacja techniczna
 |
|||
| Ion Control |
|||
| ELECTRICAL | |||
| Power supply voltage range | 10 – 32 V DC No need for an external power supply. Power is supplied on the VE.Can by the Lynx Shunt |
||
| Power consumption | 130mA at 12VDC | ||
| Audible Alarm | 4kHz Internal sounder | ||
| Connections | Integral Deutsch 12 way connector (DT04-12PA) | ||
| Cabling supplied | 15cm Deutsch 12 way to Victron RJ45 Canbus connection | ||
| Communications | NMEA2000 (expects battery instance 0) | ||
| ENVIRONMENTAL | |||
| Operating temperature | -25 to +75°C | ||
| Degree of Protection | IP67 | ||
| Salt Spray | IEC 60068-2-52: 1996 | ||
| EMC | IEC 61000 and EN55022 | ||
| ENCLOSURE | |||
| Material & Colour | Anthracite Grey ABS housing and acrylic lens | ||
| Dimensions | 110mm x 110mm x 38.5mm deep (without connector) | ||
| Depth front mounted | 21.5mm forward protrusion, 17mm rear protrusion (without connector) | ||
| Panel cut out | 64mm diameter hole with 4 mount holes, 4.3mm dia. | ||
| Weight | 265 grams | ||
Cechy urządzenia
Ion ControlThe Ion Control shows all vital data from the Lithium Battery system:
- Battery voltage (V)
- Battery charge/discharge current (A)
- Ampere-hours consumed (Ah)
- State of charge (%)
- Time to go at the current rate of discharge until the battery has reached 90% discharge
- Visual alarm: almost charged, almost discharged
It will also show the following historic values:
- The depth of the deepest discharge
- The cumulative number of Amp hours drawn from the battery
- The minimum battery voltage
- The maximum battery voltage
- The minimum cell voltage
- The maximum cell voltage
The diagnostic data displayed is:
- Software versions of the system components
- Total number of automatic system shutdowns, caused byan error
- Last four errors that occurred in the system
Using multiple Ion Controls
Multiple Ion Controls can be installed to monitor a single Lithium Battery System. All Ion Controls will display the same data. It is recommended, when more than one Ion Control is installed, to use an external network power source due to the limited capacity of the Lynx Shunt’s power supply.